Your Online Source for Complete Bikes, Bicycle Parts, Accessories, and Apparel.
Random header image... Refresh for more!

Category — BMX / DJ / Street



Eastern Night Train Bike 2011 (BI267R00)

Eastern Night Train Bike 2011 (BI267R00)

Eastern BMX / DJ / Street

Eastern Night Train
Dirt Jumping, Pump Track, or Urban riding–the Night Train is the bike to take. It’s comfortable doing a manual as it is airborne, and its Full 4130 Chromoly frame can take about pretty much anything it’s dished. Still skeptical? It comes with Avid Juicy hydraulic brakes and a RockShox Argyle fork. So if you’re smiling right now, wait until you’re riding it.

Frame: Eastern Night train Frame, Full 4130 Chromoly, Monocoque Chainstays, 135mm spacing and Disc brake tabs
Fork: RockShox Argyle 318, 80mm, 20mm Thru-Axle with Alloy Steerer
Bars: Eastern Night Train alloy with 3″ rise, 31.8mm clamp area
Headset: Sealed Bearing 45/45 Internal
BB: Sealed Bearing Euro BB
Pedals: Eastern Crown pedals
Grips: Eastern Fuquay Flyer Grip
Stem: Eastern Forged Alloy Front Load
Sprocket: Eastern Phorcys 25T 6061
Cranks: 48-Spline with Eastern Nomad Arms, 3PC Tubular 4130 Chromoly
Seat: Eastern Letters-2 Pivotal Padded
Seatpost: Alloy Pivotal
Seat Clamp: Eastern Low Boy
Tire Front: Kenda Small Block 8, 26×2.35
Tire Rear: Kenda NPJ 1052, 26×2.10
Hub Front: Eastern Sealed Bearing 36H, 20 MM axle
Hub Rear: Eastern Venus MTB single speed cassette hub.  7075-T6 alloy axle with heat-treated chromoly studs. 135mm spacing 10mm axle, 36H, 12t one-piece driver, with disc mount
Rims: Double-Wall 36H Alloy
Rear Brakes: TAvid Juicy 3 Hydraulic 160mm Rotor / Hydraulic Cable / Avid Juicy 3 Lever
Freewheel: 12T One Piece Driver w/ 6 Pawls and 15° Engagement, Sealed Bearing
Chain: Half Link Chain
Weight: 28.7 lbs
Geometry:

  • 70 degree head tube
  • 72.5 degree seat tube
  • 21.65″ top tube
  • 15.3″ chainstay

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Eastern Night Train Bike 2011 (BI267R00)

January 13, 2012   No Comments

Eastern Thunderbird Bike 2011 (BI267R01)

Eastern Thunderbird Bike 2011 (BI267R01)

Eastern BMX / DJ / Street

Eastern Thunderbird

The Thunderbird is right at the heels of Eastern’s superstar Dirt Jumper/Pump Track/Urban assaulter Nightrain. Featuring the exact same frame, the Thunderbird is spec’d to be more affordable than the Nightrain but doesn’t skimp on performance. It comes with easier-to-maintain Tektro mechanical disc brakes and the excellent Marzocchi DJ III fork. 

Frame:
Eastern Night train Frame, Full 4130 Chromoly, Monocoque Chainstays, 135mm spacing and Disc brake tabs
Fork: Marzocchi DJ III, 80mm Travel, Coil/Elastomer Sprung with Chromoly Steerer
Bars: Eastern Night Train alloy with 3″ rise, 31.8mm clamp area
Headset: Sealed Bearing 45/45 Internal
BB: Sealed Bearing Euro BB
Pedals: Eastern Crown pedals
Grips: Eastern Fuquay Flyer Grip
Stem: Eastern Forged Alloy Front Load
Sprocket: Eastern Phorcys 25T 6061
Cranks: Chromoly Heat-Treated 3pc. Cranks with 8-Spline Spindle
Seat: Eastern Letters-2 Pivotal Padded
Seatpost: Alloy Pivotal
Seat Clamp: Eastern Low Boy
Tire Front: Kenda Small Block 8, 26×2.35
Tire Rear: Kenda NPJ 1052, 26×2.10
Hub Front: Eastern Sealed Bearing 36H, 20 MM axle
Hub Rear: Eastern MTB LB-9 single speed cassette hub 135mm, 14mm axle, 36H, 12t driver, with disc mt.  
Rims: Double-Wall 36H
Rear Brakes: Tektro Cable Actuated Disc Brake, 160mm Rotor / Straight Cable / Tektro Forged Alloy Lever – Designed for Cable Disc Brakes
Freewheel: 12T One Piece Driver w/ 6 Pawls and 15° Engagement
Chain: KMC Z510
Weight: 31.8 lbs
Geometry:

  • 70 degree head tube
  • 72.5 degree seat tube
  • 21.65″ top tube
  • 15.3″ chainstay


FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Eastern Thunderbird Bike 2011 (BI267R01)

January 13, 2012   No Comments

Intense Race Pro XL Bike ’11 (BI266N09)

Intense Race Pro XL Bike '11 (BI266N09)

Intense BMX BMX / DJ / Street

The Race Pro XL uses a lightweight aluminum frame with a 21″ hydroformed toptube and quality SINZ components to create a bike that is very fast.

Frame

  • 6061 Aluminum frame
  • Hydroformed top tube
  • SINZ chromoly race 1 1/8″ fork

Components

  • SINZ 8″ alloy handlebar
  • SINZ Pro Lite 50mm stem
  • SINZ alloy Mini seat post
  • DNP 16t freewheel
  • SINZ 3 piece chromoly crankset, 180mm
  • Sealed semi cartridge bottom bracket
  • Alloy 44t chainring
  • SINZ alloy brake and brake lever
  • SINZ Pro platform pedals
  • SINZ alloy sealed bearing hubs, flip flop rear
  • SINZ 20″ x 1.75″ rims
  • ITS MK2 20 x 2.0″ front, 20 x 1.75″ rear tires
  • Approximate weight 24lbs

Geometry

Top Tube Chain Stay Head Angle Seat Angle BB Height
21″  14.25 – 15.75″ 74 72 11.5″

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Intense Race Pro XL Bike ’11 (BI266N09)

January 13, 2012   No Comments

Intense Race Expert Cruiser Bike ’11 (BI266N11)

Intense Race Expert Cruiser Bike '11 (BI266N11)

Intense BMX BMX / DJ / Street


The Race Expert Cruiser is built using a lightweight aluminum frame with hydroformed top tube and quality SINZ components.

Frame

  • 6061 Aluminum frame
  • Hydroformed top tube
  • SINZ chromoly race 1 1/8″ fork

Components

  • SINZ 4″ alloy handlebar
  • SINZ Pro Lite 50mm stem
  • SINZ alloy Mini saddle/post
  • DNP 18t freewheel
  • SINZ 3 peice alloy crankset, 165mm
  • Sealed semi cartridge bottom bracket
  • Alloy 38t chainring
  • SINZ alloy brake and brake lever
  • SINZ Pro platform pedals
  • SINZ alloy sealed bearing hubs, flip flop rear
  • SINZ 24″ x 1 3/8″ rims
  • ITS MK2 24 x 1 3/8″ tires
  • Approximate weight 19lbs

Geometry

Top Tube Chain Stay Head Angle Seat Angle BB Height
20″  14.5 – 16″ 72 69 11.5″

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Intense Race Expert Cruiser Bike ’11 (BI266N11)

January 13, 2012   No Comments

Intense Race Expert XL Bike ’11 (BI266N12)

Intense Race Expert XL Bike '11 (BI266N12)

Intense BMX BMX / DJ / Street

The Race Expert XL was built to take you podium.  Features includean aluminum frame with hydroformed top tube and SINZ components.

Frame

  • 6061 aluminum alloy
  • Hydroformed top tube
  • SINZ Chromoly Race fork, 1 1/8″

Components

  • SINZ alloy 5.5″ handlebar
  • SINZ Mini Lite stem, 50mm
  • SINZ alloy Mini saddle/post
  • DNP 16t freewheel
  • SINZ 3 piece crankset w/ semi sealed cartridge bearings
  • Alloy 42t chainring
  • SINZ alloy brake and brake lever
  • SINZ alloy hubs with sealed bearings, flip flop rear hub
  • SINZ 20″ x 1 3/8″ rims
  • ITS MK2 20 x 1 3/8″ tires
  • Approximate weight 18lbs

Geometry

Top Tube Chain Stay Head Angle Seat Angle BB Height
20″  13.5 – 15″ 73 70  11″

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Intense Race Expert XL Bike ’11 (BI266N12)

January 13, 2012   No Comments

Intense Race Junior XL Bike ’11 (BI266N13)

Intense Race Junior XL Bike '11 (BI266N13)

Intense BMX BMX / DJ / Street

The Race Junior XL was built to take you podium.  Features include an aluminum frame with hydroformed top tube and SINZ components.

Frame

  • 6061 aluminum alloy
  • Hydroformed top tube
  • SINZ Chromoly Race fork, 1″

Components

  • SINZ alloy 4″ handlebar
  • SINZ Mini Lite stem, 45mm
  • SINZ alloy Mini saddle/post
  • DNP 16t freewheel
  • SINZ 3 piece crankset w/ semi sealed cartridge bearings
  • Alloy 40t chainring
  • SINZ alloy brake and brake lever
  • SINZ alloy hubs with sealed bearings, flip flop rear hub
  • SINZ 20″ x 1 1/8″ rims
  • ITS MK2 20 x 1 1/8″ tires
  • Approximate weight 16lbs

Geometry

Top Tube Chain Stay Head Angle Seat Angle BB Height
18.75″  12.75 – 14.25″ 73 70  10.6″

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Intense Race Junior XL Bike ’11 (BI266N13)

January 13, 2012   No Comments

Intense Moto 16″ Bike ’11 (BI266N20)

Intense Moto 16

Intense BMX BMX / DJ / Street

Sometimes a smaller bike is just what you need to ride through the pits!

Frame

  • Intense BMX steel frame w/ 18.5″ top tube
  • SINZ Steel 1 1/8″ fork

Components

  • SINZ 7.5″ rise handlebar
  • SINZ steel seatpost
  • Alloy stem
  • 13 tooth freewheel
  • SINZ tubular 1 piece crankset 140mm length
  • 33 tooth crainring
  • SINZ alloy U rear brake
  • SINZ alloy brake lever
  • SINZ alloy platform pedals
  • Alloy rims 16″ x 1.5″
  • SINZ Alloy hubs

Geometry

Top Tube Chain Stay Head Angle Seat Angle BB Height
18.5″  9 – 10″ 73 69  10″

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Intense Moto 16″ Bike ’11 (BI266N20)

January 13, 2012   No Comments

Jamis Komodo 2.0 ’08 Bike (BI258R00)

Jamis Komodo 2.0 '08 Bike (BI258R00)

Jamis Bicycles BMX / DJ / Street

The Komodo was built to bravely go where few hardtailshave gone before: under the buns of Jamis sponsored rider Jordie Lunn. WithJordie’s input, Jamis designed the Komodo with slightly steeper geo, a1.5” head tube for optimal frontal strength, welded on a XAM top tubefor lowered standover and increased lateral stiffness, pumped up theseat tube diameter to take a 31.6 post for a firmer pedaling platform,and tweaked the rear triangle so you could stuff 2.4” tires in there.
 
Step out of the ordinary. Dump your full-suspender, throw a leg over the Komodo and get ready to build some serious skills.

Frame

  • 7005 triple gauge aluminum main tubes, 1.5” head tube, double gusseted main tubes
  • Heavy duty braced stays, rifled top tube & replaceable derailleur hanger

Fork

  • Marzocchi Dirt Jumper 1
  • 32mm Aluminum stanchions, 20mm thru axle, RC3 rebound compression
  • 100mm travel

Components

  • Headset: Aheadset, Zero-Stack style, with 1.5” to 1-1/8” reducer
  • Derailleurs: Shimano Deore rear, SR XC-202 front
  • Shifters: Shimano Alivio Rapidfire SL, 16-speed
  • Chain: KMC-Z82
  • Cassette: Shimano HG-40, 8-speed, 11-32
  • Crankset: Alpha Drive Bash, 32/22, with polycarbonate rock guard & heat-treated cromo rings
  • BB: TH Powerdrive, sealed cartridge, 73 x 113
  • Pedals: Flatbed alloy platform type with pedal spikes
  • Brakes: Hayes Stroker Ryde hydraulic disc brakes, V7 front and V6 rear rotors
  • Handlebar: Alloy 6061 T-6 Riser Bar, 31.8 diameter, 86mm rise x 640mm wide
  • Stem: Alloy 4-bolt bar clamp threadless, 30° rise x 60mm extension
  • Seatpost: Alloy 30.9 x 350mm
  • Grips: WTB Weirwolf dual DNA compound
  • Saddle: WTB Speed V Sport SE

Wheelset

  • Weinmann Taurus 2000 eyeletted rims
  • Formula DH-DC91 20mm thru-axle front & Shimano M475 rear Disc hubs
  • 14g black stainless steel spokes
  • WTB Moto Raptor tires, 26 x 2.4 wire bead

Published Weight: 34lbs

Geometry (in inches)

Top Tube
Head Angle
Seat Angle
Chain Stay
BB Height
Standover
14″ 22.48 68 71.5 16.73 12.4 26.57
16.5″ 23.50 68 71.5 16.73 12.4 27.44
18.5″ 24.41 68 71.5 16.73 12.4 28.50

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Jamis Komodo 2.0 ’08 Bike (BI258R00)

January 13, 2012   No Comments

Jamis Komodo 1.0 ’08 Bike (BI258R01)

Jamis Komodo 1.0 '08 Bike (BI258R01)

Jamis Bicycles BMX / DJ / Street

The Komodo was built to bravely go where few hardtailshave gone before: under the buns of Jamis sponsored Jordie Lunn. WithJordie’s input, Jamis designed the Komodo with slightly steeper geo, a1.5” head tube for optimal frontal strength, welded on a XAM top tubefor lowered standover and increased lateral stiffness, pumped up theseat tube diameter to take a 31.6 post for a firmer pedaling platform,and tweaked the rear triangle so you could stuff 2.4” tires in there.
 
Step out of the ordinary. Dump your full-suspender, throw a leg over the Komodo and get ready to build some serious skills.

Frame

  • 7005 triple gauge aluminum main tubes, 1.5” head tube, double gusseted main tubes
  • Heavy duty braced stays, rifled top tube & replaceable derailleur hanger

Fork

  • RST Launch T8, external preload adjustor, 32mm steel stanchions
  • 130mm travel

Components

  • Headset: Aheadset, Zero-Stack style, with 1.5” to 1-1/8” reducer
  • Derailleurs: SRAM SX-4 mid-cage rear, SR XC-202 front
  • Shifters: SRAM SX-4 Uni-lever trigger-shift,  16-speed
  • Chain: KMC-Z82
  • Cassette: Shimano HG-40, 8-speed, 11-32
  • Crankset: Alpha Drive Bash, 32/22, with polycarbonate rock guard
  • BB: TH Powerdrive, sealed cartridge, 73 x 113
  • Pedals: Flatbed alloy platform type with pedal spikes
  • Brakes: Tektro IOX cable-actuated disc brakes, 6” wavy rotors, with Tektro ML-330 levers
  • Handlebar: Alloy 6061 T-6 Riser Bar, 31.8 diameter, 86mm rise x 640mm wide
  • Stem: Alloy 4-bolt bar clamp threadless, 30° rise x 60mm extension
  • Seatpost: Alloy 30.9 x 350mm
  • Grips: WTB Moto-Grip medium diameter
  • Saddle: WTB Speed V Sport SE

Wheelset

  • Weinmann Taurus 2000 rims, eyeletted, 32H
  • Formula front and rear disc hubs
  • 14g black stainless steel spokes
  • WTB Moto Raptor 26” x 2.4”, wire bead

Published Weight: 35lbs

Geometry (in inches)

Top Tube
Head Angle
Seat Angle
Chain Stay
BB Height
Standover
14″ 22.48 68 71.5 16.73 12.4 26.57
16.5″ 23.50 68 71.5 16.73 12.4 27.44

FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Jamis Komodo 1.0 ’08 Bike (BI258R01)

January 13, 2012   No Comments

Banshee AMP Bike ’11 (BI259R00)

Banshee AMP Bike '11 (BI259R00)

Banshee Bikes BMX / DJ / Street

The Amp is the spark you need to hit the big one. Strong, light, tight and totally dialed for the DJ’r. Its purpose is for one thing: To give you the best advantage to stomp the trick you’ve been trying to nail for months. Super compact for rotations and low standover for cans and whips, you’ll feel like you’re cheating.

Features:

  • Hydroformed 7005 AL tubes with gusseting formed into the tube for added strength with less weight
  • Internal ribbed stays for increased stiffness for railing berms and sticking landings
  • 1 1/8″ integrated headset
  • 30.9mm seatpost
  • 73mm BB
  • ISCG 05
  • 110mm head tube length
  • 135mm rear hub spacing
  • 10mm rear dropout axle size
  • 2 year warranty (original owner)
  • Approx. 4.5 lbs

Complete bike specs:

  • Fork: Manitou Circus 100mm
  • Headsets: Banshee Munro IC integrate 45 std
  • Seatpost: Banshee 30.9
  • Seat Clamp: Banshee 31.8
  • Tire: Geax AKA 26×2.2
  • Rims: Sun Ringle MTX 29
  • Hubs: Banshee 32hole; 20thru front, bolt-on rear
  • Spokes: Pillar 14g
  • Chainwheel: Race Face Ride w/ 32t ring
  • Chain: KMC Z
  • Saddle: Funn Throne
  • Handlebar: Race Face Evolve AM low rise (710mm)
  • Stem: Truvativ Hussefelt 45mm
  • Grips: Funn Combat lock on
  • Brake: Avid Juicy Three w/ 160mm rotor (rear only)
  • Weight: 26.3 lbs

Geometry


Rider height
Top Tube Standover Chainstay Wheelbase
Reg  < 5′ 10″
 22.8″  24.5  15.7 – 16.7
40.3 – 41.3
Long  5′ 10″ or >
 23.8″  24.7  115.7 – 16.7
41.3 – 42.3




Head Angle
Seat Angle
BB Height
68.5
69.5
 12.4


FREE SHIPPING on Most Orders Over $50

Click image or here for more information…

Banshee AMP Bike ’11 (BI259R00)

January 13, 2012   No Comments